{{scheme.chgp}}%
{{scheme.chgp}}%
No Matches Found
{{scheme.chgp}}%
No Matches Found
No Matches Found
Mold-Tek Technologies Ltd
Mold-Tek Technologies Ltd Falls 7.85%: 3 Key Factors Driving the Weekly Decline
Mold-Tek Technologies Ltd experienced a turbulent week from 15 to 18 September 2026, with its share price declining by 7.85% to close at Rs.193.05, significantly underperforming the Sensex which fell 0.41% over the same period. The stock faced intense selling pressure early in the week, hitting lower circuit limits on consecutive days before a sharp rebound on 17 September, only to retreat slightly on the final trading day. This review analyses the key events and price movements that shaped the stock’s volatile week.
Mold-Tek Technologies Ltd Locks at Upper Circuit With 5% Gain — Buyers Queue, Sellers Absent
At Rs 196.53, the buying was done — not because demand dried up, but because the exchange wouldn't let the stock go any higher. Mold-Tek Technologies Ltd locked at its upper circuit of 5.0% on 17 Sep 2026, with buyers queuing and no sellers willing to part with shares.
Mold-Tek Technologies Ltd Locks at Lower Circuit With 5.0% Loss — Sellers Queue, No Buyers in Sight
At Rs 187.18, sellers were still queuing — but there were no buyers willing to take the other side. Mold-Tek Technologies Ltd locked at its lower circuit of 5.0% on 16 Sep 2026, with unfilled sell orders and a frozen price.
Mold-Tek Technologies Ltd Locks at Lower Circuit With 3.56% Loss — Sellers Queue, No Buyers in Sight
At Rs 200, sellers were still queuing — but there were no buyers willing to take the other side. Mold-Tek Technologies Ltd locked at its lower circuit of 3.56% on 15 Sep 2026, with unfilled sell orders and a frozen price, reflecting persistent selling pressure despite the price floor.
Mold-Tek Technologies Ltd is Rated Buy by MarketsMOJO
Mold-Tek Technologies Ltd is rated Buy by MarketsMOJO, with this rating last updated on 18 August 2026. However, the analysis and financial metrics presented here reflect the stock's current position as of 10 September 2026, providing investors with the most up-to-date view of the company’s performance and outlook.
Broad-Based Technical Strength Lifts Mold-Tek Technologies Ltd to 52-Week High of Rs 227.2
With every major technical indicator aligned to the upside, Mold-Tek Technologies Ltd surged to a fresh 52-week high of Rs 227.2 on 8 Sep 2026, marking a significant milestone in its price momentum despite a broadly weak market backdrop.
Mold-Tek Technologies Ltd Locks at Upper Circuit With 5% Gain — Buyers Queue, Sellers Absent
At Rs 202.39, the buying was done — not because demand dried up, but because the exchange wouldn't let the stock go any higher. Mold-Tek Technologies Ltd locked at its upper circuit of 5% on 2 Sep 2026, with buyers queuing and no sellers willing to part with shares.
Mold-Tek Technologies Ltd is Rated Buy
Mold-Tek Technologies Ltd is rated 'Buy' by MarketsMOJO, with this rating last updated on 18 August 2026. However, the analysis and financial metrics presented here reflect the stock's current position as of 30 August 2026, providing investors with the latest insights into the company’s performance and outlook.
Has Mold-Tek Technologies Ltd declared dividend?
Yes, Mold-Tek Technologies Ltd has declared a dividend of 200%, amounting to ₹1 per share, with an ex-date of September 11, 2026. The company has shown varying total returns across different periods, with strong long-term performance.
Mold-Tek Technologies Gains 1.87%: 6 Key Factors Driving the Week’s Momentum
Mold-Tek Technologies Ltd experienced a volatile but ultimately positive week, closing at Rs.190.65 on 21 August 2026, up 1.87% from the previous Friday’s close of Rs.187.15. This performance notably outpaced the Sensex, which declined 0.40% over the same period, reflecting a resilient rebound amid mixed market conditions and significant company-specific developments.
Mold-Tek Technologies Locks at Upper Circuit With 5.0% Gain — Buyers Queue, Sellers Absent
At Rs 189.07, the buying was done — not because demand dried up, but because the exchange wouldn't let the stock go any higher. Mold-Tek Technologies locked at its upper circuit of 5.0% on 20 Aug 2026, with buyers queuing and no sellers willing to part with shares.
A 5% Single-Day Surge Takes Mold-Tek Technologies Ltd to Its Upper Circuit Limit of Rs 180.07
At Rs 180.07, the buying was done — not because demand dried up, but because the exchange wouldn't let the stock go any higher. Mold-Tek Technologies Ltd locked at its upper circuit of 5.0% on 18 Aug 2026, with buyers queuing and no sellers willing to part with shares.
Mold-Tek Technologies Ltd Upgraded to Buy on Strong Financial and Technical Momentum
Mold-Tek Technologies Ltd has seen its investment rating upgraded from Hold to Buy, reflecting significant improvements across quality, valuation, financial trends, and technical indicators. This micro-cap software and consulting company’s recent stellar quarterly performance, combined with bullish technical signals, has prompted analysts to revise their outlook positively.
Mold-Tek Technologies Ltd Technical Momentum Shifts Signal Bullish Outlook
Mold-Tek Technologies Ltd, a micro-cap player in the Computers - Software & Consulting sector, has witnessed a notable shift in its technical momentum, prompting an upgrade in its MarketsMOJO Mojo Grade from Hold to Buy as of 18 Aug 2026. Despite a modest day decline of 2.22%, the stock’s technical indicators reveal a strengthening bullish trend, signalling potential opportunities for investors amid mixed short-term price action.
Golden Cross Forms in Mold-Tek Technologies Ltd — On a Day the Stock Fell 2.22%. What the Mixed Signals Mean
The 50-day moving average has crossed above the 200-day moving average for Mold-Tek Technologies Ltd, signalling a golden cross on 18 Aug 2026. Yet, the stock declined 2.22% on the same day, while monthly technical indicators remain only mildly bullish or neutral. This divergence between the moving averages and price action calls for a deeper examination of the signal's reliability.
Mold-Tek Technologies Ltd Locks at Lower Circuit With 4.06% Loss — Sellers Queue, No Buyers in Sight
At Rs 178.00, sellers were still queuing — but there were no buyers willing to take the other side. Mold-Tek Technologies Ltd locked at its lower circuit of 5% on 17 Aug 2026, with unfilled sell orders and a frozen price.
Mold-Tek Technologies Ltd Falls 2.17%: 4 Key Factors Driving the Week’s Volatility
Mold-Tek Technologies Ltd experienced a turbulent week from 10 to 14 August 2026, with its stock price declining by 2.17% to close at ₹187.15, underperforming the Sensex which fell 0.37%. The week was marked by a downgrade in the company’s quality grade and investment rating, followed by two consecutive days hitting the lower circuit amid heavy selling pressure. Despite a strong quarterly financial performance reported earlier, investor sentiment turned cautious, reflecting mixed signals from fundamentals and technical indicators.
Mold-Tek Technologies Ltd Locks at Lower Circuit With 2.75% Loss — Sellers Queue, No Buyers in Sight
At Rs 180, sellers were still queuing — but there were no buyers willing to take the other side. Mold-Tek Technologies Ltd locked at its lower circuit of 2.75% on 12 Aug 2026, with unfilled sell orders and a frozen price, signalling persistent selling pressure in a micro-cap stock with limited liquidity.
Mold-Tek Technologies Ltd Locks at Lower Circuit With 4.99% Loss — Sellers Queue, No Buyers in Sight
At Rs 182.5, sellers were still queuing — but there were no buyers willing to take the other side. Mold-Tek Technologies Ltd locked at its lower circuit of 4.99% on 11 Jun 2026, with unfilled sell orders and a frozen price.
{{list.post_title}}
{{list.post_excerpt}}
{{list.post_title}}
{{list.post_excerpt}}
