Kabra Extrusion

Why is Kabra Extrusion Technik Ltd falling/rising?

As of 08-Aug, Kabra Extrusion Technik Ltd's stock price is currently at 449.50, reflecting a decline of 5.78% after a trend reversal. Despite a strong year-to-date increase of 98.59%, recent volatility and underperformance against its sector indicate a shift in momentum.

As of 08-Aug, Kabra Extrusion Technik Ltd's stock price is falling, currently at 449.50, which reflects a decrease of 27.6 or 5.78%. This decline follows a trend reversal after two consecutive days of gains. The stock has underperformed its sector by 6.2% today and reached an intraday low of Rs 442.1, marking a significant drop of 7.34%. Additionally, the stock has exhibited high volatility, with an intraday volatility of 5.06%. <BR><BR>Despite these negative movements, it is noteworthy that Kabra Extrusion has shown strong performance over longer periods, with a year-to-date increase of 98.59% and a one-year increase of 71.40%. However, the current day's performance indicates a shift in momentum, as the stock is trading lower than its recent highs and has seen a decrease in trading volume, although delivery volume has increased by 75.63% compared to the five-day average. Overall, the combination of recent price declines, high volatility, and underperformance against the sector contributes to the current falling stock price.

Which are the latest news on Kabra Extrusion?

Are Kabra Extrusion Technik Ltd latest results good or bad?

Kabra Extrusion Technik Ltd's latest results are concerning, showing a 44.81% revenue growth but a net loss of ₹1.74 crores, down from a profit in the previous quarter. The decline in operating margins and negative returns on equity indicate significant challenges, leading to a 7.19% drop in stock price post-announcement.

Kabra Extrusion Technik Ltd's latest results indicate a challenging situation for the company. While it reported a significant revenue growth of 44.81% year-on-year, reaching ₹124.49 crores, this growth has not translated into profitability. The company posted a net loss of ₹1.74 crores for the quarter, a stark contrast to the profit of ₹6.90 crores in the previous quarter. This marks a concerning trend, as it reflects a decline in operational efficiency and margin compression.<BR><BR>The operating margin has dropped to 4.97%, down from 11.58% a year ago, signaling significant pressure on profitability. The company's return on equity (ROE) and return on capital employed (ROCE) have also turned negative, indicating that it is currently destroying shareholder value rather than creating it.<BR><BR>The market reacted negatively to these results, with the stock price falling by 7.19% following the announcement. Overall, while the revenue growth is a positive sign, the inability to achieve profitability and the deterioration in key financial metrics suggest that the latest results are more bad than good for Kabra Extrusion.

Should I buy, sell or hold Kabra Extrusion Technik Ltd?

When is the next results date for Kabra Extrusion Technik Ltd?

The next results date for Kabra Extrusion Technik Ltd is 30 July 2026.

The next results date for Kabra Extrusion Technik Ltd is scheduled for 30 July 2026.

How big is Kabra Extrusion?

As of 10th June, Kabra Extrusion Technik Ltd has a market capitalization of 835.00 Cr and reported net sales of 451.06 Cr with a net loss of 5.36 Cr in the latest four quarters. Shareholder's funds were 462.38 Cr, and total assets were 787.09 Cr as of March 2025.

As of 10th June, Kabra Extrusion Technik Ltd has a market capitalization of 835.00 Cr, categorizing it as a Micro Cap company.<BR><BR>In the latest four quarters, Kabra Extrusion reported net sales of 451.06 Cr. However, it experienced a loss of 5.36 Cr in net profit during the same period.<BR><BR>The latest annual period for the balance sheet is March 2025, where shareholder's funds amounted to 462.38 Cr and total assets were reported at 787.09 Cr.

Who are in the management team of Kabra Extrusion?

The management team of Kabra Extrusion includes Executive Chairman Shreevallabh G Kabra, Vice Chairman & Managing Director Anand S Kabra, and several independent directors, with Antony Alapat serving as Company Secretary. This team is responsible for guiding the company's strategy and operations.

The management team of Kabra Extrusion includes the following key members:<BR><BR>1. **Shreevallabh G Kabra** - Executive Chairman<BR>2. **Satyanarayan G Kabra** - Director<BR>3. **Anand S Kabra** - Vice Chairman & Managing Director<BR>4. **B L Bagra** - Non-Executive & Independent Director<BR>5. **Ekta A Kabra** - Managing Director<BR>6. **Boman Moradian** - Non-Executive & Independent Director<BR>7. **Chitra Andrade** - Independent Director<BR>8. **Utpal Sheth** - Independent Director<BR>9. **Antony Alapat** - Company Secretary & Compliance Officer<BR><BR>This team plays a crucial role in guiding the company's strategy and operations.

Who are the peers of the Kabra Extrusion?

Kabra Extrusion's peers include Rajoo Engineers, Eimco Elecon(I), Mamata Machinery, Bajaj Steel Inds, Airfloa Rail, Z-Tech (India), OSEL Devices, Cellecor Gadgets, Ganesh Green, and Macpower CNC. While Kabra Extrusion has average management risk and below-average growth, its 1-year return of -19.88% is better than Rajoo Engineers but worse than Z-Tech (India).

Peers: The peers of Kabra Extrusion are Rajoo Engineers, Eimco Elecon(I), Mamata Machinery, Bajaj Steel Inds, Airfloa Rail, Z-Tech (India), OSEL Devices, Cellecor Gadgets, Ganesh Green, and Macpower CNC.<BR><BR>Quality Snapshot: Excellent management risk is observed at Rajoo Engineers, Eimco Elecon(I), Mamata Machinery, Bajaj Steel Inds, Airfloa Rail, Z-Tech (India), OSEL Devices, Cellecor Gadgets, Ganesh Green, and Macpower CNC, while Average management risk is found at Kabra Extrusion. Growth is excellent at Rajoo Engineers, Airfloa Rail, Z-Tech (India), OSEL Devices, Cellecor Gadgets, and Ganesh Green, while Kabra Extrusion, Mamata Machinery, Bajaj Steel Inds, and Macpower CNC show below average growth. Excellent capital structure is noted at Rajoo Engineers, Eimco Elecon(I), Mamata Machinery, Bajaj Steel Inds, and Z-Tech (India), while Kabra Extrusion, Airfloa Rail, OSEL Devices, and Ganesh Green have a good capital structure, and Cellecor Gadgets has an average capital structure.<BR><BR>Return Snapshot: The peer with the highest 1-year return is Z-Tech (India) at 0.00%, while the lowest is Rajoo Engineers at -57.70%. Kabra Extrusion's 1-year return of -19.88% is better than Rajoo Engineers but worse than Z-Tech (India). Additionally, the six-month return is negative for Bajaj Steel Inds, Airfloa Rail, and Kabra Extrusion.

What does Kabra Extrusion do?

Kabra Extrusion Technik Ltd specializes in high-performance plastic extrusion machinery for manufacturing pipes and films, and is part of the Kolsite Group. As of March 2026, it reported net sales of 120 Cr and a net profit of 7 Cr, with a market cap of INR 835 Cr.

Overview:<BR>Kabra Extrusion Technik Ltd is a leading player in the Plastic Extrusion Machinery industry, specializing in high-performance extrusion solutions for manufacturing pipes and films, and operates within the micro-cap market segment.<BR><BR>History:<BR>Incorporated in October 1982, Kabra Extrusion Technik Ltd is the flagship company of the Kolsite Group. The latest quarterly results reported net sales and net profit for the period ending March 2026.<BR><BR>Financial Snapshot:<BR>Most recent Net Sales: 120 Cr (Quarterly Results - Mar 2026) <BR>Most recent Net Profit: 7 Cr (Quarterly Results - Mar 2026) <BR>Market-cap value: INR 835 Cr (Micro Cap)<BR><BR>Key Metrics:<BR>P/E: N/A <BR>Industry P/E: 37 <BR>Dividend Yield: 1.06% <BR>Debt-Equity: 0.27 <BR>Return on Equity: -1.17% <BR>Price to Book: 1.86<BR><BR>Contact Details:<BR>Address: Fortune Terraces 10th Flr, New Link Road Andheri (W) Mumbai Maharashtra : 400053 <BR>Tel: 91-22-26734822/23/24/25 <BR>Email: ket_sd@kolsitegroup.com <BR>Website: http://www.kolsite.com

Is Kabra Extrusion overvalued or undervalued?

As of November 7, 2025, Kabra Extrusion is considered overvalued with a PE ratio of 290.49 and an EV to EBITDA of 35.69, alongside low ROCE and ROE, and a year-to-date return of -58.19%, indicating a significant shift in its valuation from fair to risky.

As of 7 November 2025, the valuation grade for Kabra Extrusion has moved from fair to risky, indicating a significant shift in its perceived value. The company is currently considered overvalued, with a staggering PE ratio of 290.49 and an EV to EBITDA ratio of 35.69, both of which are considerably higher than its peers. In comparison, Thermax, a peer in the industrial manufacturing sector, has a PE ratio of 56.7 and an EV to EBITDA of 37.35, while BEML Ltd shows a PE of 56.53 and an EV to EBITDA of 45.17, highlighting the extreme valuation of Kabra Extrusion.<BR><BR>Additionally, Kabra Extrusion's ROCE stands at a mere 4.77% and ROE at 5.28%, which are low compared to industry standards. The company's recent stock performance has also been poor, with a year-to-date return of -58.19%, significantly underperforming the Sensex, which has gained 6.50% during the same period. This combination of high valuation ratios and weak financial performance suggests that Kabra Extrusion is overvalued in the current market.

How has been the historical performance of Kabra Extrusion?

Kabra Extrusion's historical performance indicates a decline in net sales from 670.01 Cr in March 2023 to 476.85 Cr in March 2025, despite stable profit after tax and improved cash flow from operations. Concerns arise from increasing liabilities and fluctuating profitability amidst decreasing sales.

Answer:<BR>The historical performance of Kabra Extrusion shows a fluctuating trend in net sales and profitability over the years, with a notable decline in recent periods.<BR><BR>Breakdown:<BR>Kabra Extrusion's net sales peaked at 670.01 Cr in March 2023 but have since decreased to 476.85 Cr by March 2025. The total operating income followed a similar trend, declining from 670.01 Cr in March 2023 to 476.85 Cr in March 2025. Raw material costs have also decreased from 492.24 Cr in March 2023 to 320.52 Cr in March 2025, while employee costs rose slightly to 50.26 Cr in March 2025 from 47.72 Cr in March 2023. Operating profit (PBDIT) saw a decline from 77.24 Cr in March 2023 to 62.65 Cr in March 2025, with a corresponding drop in profit before tax from 54.56 Cr to 39.27 Cr. The profit after tax remained relatively stable, increasing slightly from 31.58 Cr in March 2024 to 31.66 Cr in March 2025. Total liabilities increased from 716.13 Cr in March 2024 to 787.09 Cr in March 2025, while total assets also rose from 716.13 Cr to 787.09 Cr in the same period. Cash flow from operating activities improved to 42.00 Cr in March 2025, up from 32.00 Cr in March 2024, although the net cash outflow for March 2025 was -4.00 Cr. Overall, while Kabra Extrusion has shown some resilience in profitability, the declining sales and increasing liabilities are areas of concern.

Is Kabra Extrusion technically bullish or bearish?

As of September 23, 2025, Kabra Extrusion's technical trend has shifted to bearish, driven by negative signals from daily moving averages, weekly KST, and Bollinger Bands, despite a mildly bullish weekly MACD, with a year-to-date decline of 49.82% reinforcing this sentiment.

As of 23 September 2025, the technical trend for Kabra Extrusion has changed from mildly bearish to bearish. The current technical stance is bearish with moderate strength. Key indicators driving this stance include the daily moving averages showing bearish signals, the weekly KST and Bollinger Bands both indicating bearish conditions, and the monthly MACD reflecting a bearish outlook. Although the weekly MACD is mildly bullish, it is outweighed by the overall bearish signals from other indicators. The stock's recent performance, particularly a significant year-to-date decline of 49.82%, further supports the bearish sentiment.

Who are the top shareholders of the Kabra Extrusion?

The top shareholders of Kabra Extrusion include Anand Shreevallabh Kabra with 18.2%, followed by public shareholder Seema Heinz Mathias at 1.07%. Individual investors hold 27.35%, while foreign institutional investors and mutual funds account for 1.46% and 0.01%, respectively, with no pledged promoter holdings reported.

The top shareholders of Kabra Extrusion include the promoters, with Anand Shreevallabh Kabra holding the highest individual stake at 18.2%. In terms of public shareholders, Seema Heinz Mathias is the largest, owning 1.07%. Additionally, individual investors collectively hold 27.35% of the shares. The company also has some institutional involvement, with 16 Foreign Institutional Investors (FIIs) holding a total of 1.46% and two mutual fund schemes holding 0.01%. There are no pledged promoter holdings reported.

What is the bonus history of the Kabra Extrusion?

Kabra Extrusion Technik Ltd announced a 1:1 bonus issue on September 6, 2010, with a record date of September 7, 2010, allowing shareholders to double their holdings.

Kabra Extrusion Technik Ltd has a bonus history that includes a 1:1 bonus issue announced on September 6, 2010. The record date for this bonus was September 7, 2010. This means that for every share held, shareholders received an additional share, effectively doubling their holdings at that time. If you have any more questions about the company or its financial activities, feel free to ask!

Has Kabra Extrusion declared dividend?

Kabra Extrusion Technik Ltd has declared a 70% dividend, amounting to ₹3.5 per share, with an ex-date of July 12, 2024. While the company shows significant volatility in total returns, it has experienced negative returns in the short term and strong positive returns over the longer term.

Kabra Extrusion Technik Ltd has declared a 70% dividend.<BR><BR>Dividend Details:<BR>- Percentage announced: 70%<BR>- Amount per share: 3.5<BR>- Ex-date: Jul-12-2024<BR><BR>Dividend Yield: 1.25%.<BR><BR>Total Returns by Period:<BR>In the last 6 months, the price return was -45.56%, the dividend return was 0%, resulting in a total return of -45.56%.<BR><BR>Over the past year, the price return was -29.63%, the dividend return was 0.83%, leading to a total return of -28.8%.<BR><BR>In the 2-year period, there was a price return of -39.34%, a dividend return of 1.53%, culminating in a total return of -37.81%.<BR><BR>For the 3-year period, the price return was -15.68%, with a dividend return of 3.49%, resulting in a total return of -12.19%.<BR><BR>In the last 4 years, the price return was 46.58%, the dividend return was 6.39%, giving a total return of 52.97%.<BR><BR>Finally, over 5 years, the price return was 463.99%, the dividend return was 23.74%, resulting in an impressive total return of 487.73%.<BR><BR>Overall, while Kabra Extrusion has declared a dividend, the total returns over various periods show significant volatility, with negative returns in the shorter terms and strong positive returns over the longer term, indicating a mixed performance.